MasterSeal CR 170
Masilla elástica bicomponente de polisulfuro tixotrópica de alta resistencia química,
homologada para sellado de juntas en aeropuertos, gasolineras, e instalaciones
industriales sometidas a agentes agresivos.
MasterSeal CR 170
Página 5 de 9
Edición: 21/01/2019
Líquidos aprobados para almacenamiento (S), tratamiento (H) y relleno (F) de sustan-
cias perjudiciales para el agua, con niveles de afección: bajo (1), medio (2) y alto (3)
Affección
Trasitable
1
Gasoline for spark ignition engines according to EN 228 with a maximum 5 %
by volume of bio-alcohol according to
EN
15376
SFH 2
x
1a
Gasoline for spark ignition engines according to EN 228 with a maximum 20 %
by volume of bio-alcohol according to Directive 2009/28/EC
SFH 2
x
2
Aviation gasoline
SFH 2
x
3
Fuel EL, unused combustion engine oil, unused motor vehicle gear oil, mixture of satu-
rated and aromatic hydrocarbons with an aromatic content < 20 wt.
-% and a flash
point > 60 °C
SFH 2
x
3b
Diesel fuel according to EN 590 with a maximum of 20 % by volume of bio-diesel fuel
according to EN 14214
SFH 2
x
4
All hydrocarbons as well as mixtures containing benzene with max.
5 % by volume
except fuels (including Gr.
2, 3, 4b and 4c, excluding Gr.
1, 1a, 3b and 4a)
SFH 1
walkable only
4a
Benzene and mixtures containing benzene
SFH 1
walkable only
4b
Crude oils
SFH 2
x
4c
Used internal combustion engine oils and used vehicle gear oils with a point of ignition
of > 55 °C
SFH 2
x
5
Monovalent and polyvalent alcohol (up to a maximum of 48 % by volume of methanol
and ethanol), glycols, polyglycols and their monoethers as well as their aqueous mix-
tures
SFH 2
x
5a
All alcohols and glycol ethers as well as their aqueous mixtures
SFH 2
x
5b
Monovalent and polyvalent alcohol ≥ C2 (up to a maximum of 48% by volume of etha-
nol) as well as their aqueous mixtures
SFH 2
x
5c
Ethanol including ethanol according to DIN EN 15376 (independent of its manufacturing
process) as well as its aqueous mixtures
SFH 2
x
7b
Bio diesel fuel according to EN 14214
SFH 2
x
8
Aqueous solutions of aliphatic aldehyde up to 40 %
SFH 2
x
9
Aqueous solutions of organic acids (carboxylic) up to 10 % as well as their salts in
aqueous solutions
SFH 2
x
10
Inorganic acids (mineral acids) up to 20 % as well as acidic, hydrolysed inorganic salts
in aqueous solution (pH < 6), except for hydrofluoric acids and acids with an oxidizing
effect and their salts
SFH 1
walkable only
11
Inorganic lye as well as alkaline hydrolysing inorganic salts in aqueous solution
(pH> 8), except ammonia solution and oxidising salt solutions (e.
g.
hypochlorite)
SFH 2
x
12
Aqueous solutions of inorganic non-oxidizing salts with a pH value between 6 und 8
SFH 2
x
13
Amines as well as their salts (in aqueous solutions)
SFH 2
x
-
Single liquid: Skydrol
®
LD 4
SFH 2
x
-
Single liquid: Shell Diala
®
SFH 2
x
-
Single liquid: AdBlue
®
(aqueous urea solution 35%)
SF3 / H2
x
